Kodak i800 Series - Manual (Page 65)

A-61510 January 2005
3-25
Image Address area The Image Address area allows you to enter a starting image address.
Current value  displays the next image address which will be used if
no value is entered in the image address field.
Image Address  an image address is a unique identifier assigned to
each individual document and may contain up to 30 characters
consisting of a maximum of 27 digits and 3 delimiters. The structure of
this field must match the format defined in the Image Address Template
fields. This value is used by the scanner as the next image address
which is assigned to the next document which enters the transport. This
is also referred to as the Starting Image Address.
Document Count  this value is used to assign the document count for
the next document entering the transport and is incremented
sequentially by the scanner unless another document count is received
from the host. This value is returned in the image header. The format of
this counter is defined on the Printer tab in the Counter field.
Image Address Template
area The Image Address Template area allows you to define an image
address area or choose an existing template.
Image Address Template area  up to four fields can be defined.
Each field may be a maximum of 9 characters. The total image address
cannot exceed 27 characters (30 with 3 delimiters). The i800 Series
Scanners have more options available for image addressing schemes
with the following guidelines:
You may define from 0 to 4 fixed fields.
Only one field may be assigned to a level. You are only allowed one level
1 field, one level 2 field, and one level 3 field.
There is no requirement to have any level field.