Kodak i800 Series - Manual (Page 37)

A-61510 January 2005 2-31
Programmable keys There are three programmable keys on the Operator Control Panel of
the scanner. These keys can be assigned functions by the host
application.
Programmable keys are available for use by the operator when
the scanner is enabled. The Operator Control Panel displays the
numbers 1 through 3. These numbers correspond to the buttons
on the Control Panel.
Each of the programmable keys can be assigned the following
functions:
• No Scanner Functionality (default)
• Scanner End-of-Job
• Terminate Batch
• Skip Multi-feed Detection
• Skip Printing
• Skip Patch Recognition