Kodak i800 Series - Manual (Page 46)

A-61510 January 2005
3-6
The Imaging tab The Imaging tab allows you to define image processing values that can
be applied to your scanner.
Image Selection box  lists the available sides (front and rear) of an
image where you can define individual image processing values. If you
have an i810 or i830 scanner, only Front Bi-tonal and Rear Bi-tonal
will be displayed. If you have an i820 or i840 scanner, Front Color, Rear
Color, Front Bi-tonal and Rear Bi-tonal will be displayed. For more
information about these selections see the section entitled, “Image
outputs” in Chapter 1.
NOTE: Whatever is highlighted in the Image Selection box determines
the values available on the Imaging, Paper and Compression
tabs. In the screen below, all the displayed values will be
applied to the Front Bi-tonal image.