Kenwood RC-2000 - Manual (Page 39)

35
KEYS (L1 ~ L3)
AT/ AT IN/ AT R IN (L1 key)
Press to activate the Automatic Antenna Tuner function
for the HF ~ 50 MHz bands. When it is in-line, [AT IN] or
[AT R IN] appears {page 10}.
CALL (L1 key)
Appears only when you operate the 144 MHz ~ 1.2 GHz
bands. Press to recall the Call channel for the current
operating band {page 10}.
RIT (L2 key)
Press to activate the RIT function. Turn the RIT/ SUB
control to adjust the offset frequency. Press and hold the
key to clear the offset {page 12}.
XIT (L2 key)
Press to activate the XIT function. Turn the RIT/ SUB
control to adjust the offset frequency. Press and hold the
key to clear the offset {page 15}.
OFF (L3 key)
Exit the Easy Viewing mode.
UP
Refer to the [UP] instructions {page 15}.
CLR
Refer to the [CLR] instructions {page 16}.
M>V
Refer to the [M>V] instructions {page 16}.
MENU
Refer to the [MENU] instructions {page 16}.
M.IN
Refer to the [M.IN] instructions {page 17}.
V/M
Refer to the [V/M] instructions {page 17}.