Kenwood KIV700 - Manual (Page 81)

English |
81
USB ERROR: Some trouble may have occurred to the
connected USB device.

Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
iPod Error: Connection to the iPod has failed.

Remove the USB device and then
reconnect it.
 Confirm that the software for the iPod is
the latest version.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
Over Capacity: Recording or copying was canceled because
internal memory space ran out while copying
from USB device.

Delete unnecessary files and record or
copy once more.
Copy Error: • An incompatible digital audio player was
used.
• Cannot copy because the USB device is not
firmly inserted.
Delete Error:
Format Error: Abnormal condition detected while deleting
or formatting.

Repeat the operation once more. This may
take some time. If the message recurs,
contact your nearest Kenwood dealer.
Can’t Download:
Download Error:
This unit does not work properly for some
reason.

Press the reset button to download it
again. If this error is still displayed, consult
a local Kenwood dealer.
 Try all over again from the start. If this error
is still displayed, consult a local Kenwood
dealer.
Writing Error: Writing failed while the file was downloaded.
 Try the downloading again.
Memory Full: The TAG Memory of HD Radio or RDS is full.
iPod Full: The iPod Memory is full.
No TAG Function:
iPod which does not support the TAG
Memory is connected.
N/A Channels: No receivable channel and category.
No Number: • The calling party does not notify a caller ID.
• There is no phone number data.
No Data: • There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
No Entry: The cell-phone has not been registered
(pairing).
HF Disconnect: The unit cannot communicate with the cell-
phone.
HF Error 07: The memory cannot be accessed.

Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF Error 68: The unit cannot communicate with the cell-
phone.

Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Un Known: The Bluetooth device cannot be detected.
Device Full: 5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
PIN Code NG: The PIN code is wrong.
Connect NG: The unit cannot be connected to the device.
Pairing Failed: Pairing error.
Err No Matching:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft: Voice is too small and cannot be recognized.
Too Loud: Voice is too large to be recognized.
Too Long: The word or utterance is too long to be
recognized.
No Phonebook: Data is not contained in the phone book.
No Message: No short message in In Box.
No Record: The voice tag is not registered in the phone
book.
Memory Full: The number of voice tags reaches the
maximum number to be registered in the
phone book.
Favorite: No Memory:
The procedure is not registered to Favorite
Preset Memory
No Access: The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.
No Voice: No call.