General operation, Exit of the demonstration mode, Power and source select – Kenwood KIV700 User Manual
Page 5: Volume, Menu list operation
English
|
5
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [Volume] knob to quit the
demonstration mode when the message “To
Cancel DEMO Press the volume knob” is displayed
(approx. 15 seconds).
2
Turn the [Volume] knob to select “YES” and then
press the [Volume] knob.
Power and Source Select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Press the [SRC] button and
then turn the [Volume] knob. To determine the
selected source, press the [Volume] knob.
• SRC Select mode 2: Pressing the [SRC] button
each time switches between sources.
Tuner (“TUNER”)
➜
USB, iPod or Zune (“USB”,
“iPod”, or “Zune”)
➜
Internal Memory (“Int.
Mem.”)
➜
Auxiliary input (“AUX”)
➜
Standby
(“STANDBY”)
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in “Source Select” of
Settings> (page 38)
.
• Auxiliary input source is initially set to “OFF”. Set “Built in
AUX” described in
to “ON”.
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”, “Zune”.
• Internal Memory source cannot be selected when “AV Out
Set” described in
is set to “ON”.
Volume
Turning the [Volume] knob adjusts the sound
volume.
Menu List Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Function items vary from source to source. For a list
of the function items, refer to
.
✍
SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
2
Enter Menu List mode
Press the [MENU] button.
3
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍
Press the [MENU] button to return to the
previous item.
Operation example:
Music
Playlists
My
…
Artists
Albums
…
Videos
Play Mode
…
[Volume]
[MENU]
[Volume]
[MENU]
1
1
2
3
4
2
2
3
4
3
1
1 sec.
In this manual, the above selection is indicated as
Select “Music”
>
“Playlists”
>
“My Best 25”.
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
5
Exit Menu Setting mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy.
Press the [MENU] button in the first hierarchy to
exit the Menu List mode.
General Operation