Kenwood KIV700 - Manual (Page 24)

24
| KIV-BT900/ KIV-700
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “TUNER” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
Selecting the Receiving Band
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “FM1”, “FM2”, “FM3” or “AM”.
Selecting the Receiving station
Press the [ 4] or [¢] button.
✍ Details of the station selecting in operation are
set in the “Seek Mode” of
(page
24) .
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
Display example of information display mode
1
2
1 Station information (see
Display> (page 36))
2 Status indicator (see
(page 71))
Tuner Setting
You can select following Tuner Setting items.
1
Select Tuner source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“Seek Mode” Selects the tuning mode of the radio.
“Auto1”: Automatic search for a station.
“Auto2”: Search in order of the stations in the
Preset memory.
“Manual”: Normal manual tuning control.
“Auto Memory” Memorizes 6 stations with good reception
automatically.
“YES”/ “NO”
“TI” Switches to the traffic information automatically
when the traffic bulletin starts.
“ON”/ “OFF”
“TAG Memory” Displays the tag memory usage of RDS station
receiver. Up to 50 tags can be registered to
this unit.
“##/50”
“Tagging” Turns ON / OFF the tag memory function of RDS
station receiver.
”ON”/ “OFF”
“Forced MONO” Reduces the noise when stereo broadcasts are
received as monaural.
“ON”/ “OFF”
( : Factory setting)
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
• Traffic information (TI)
Turns ON or OFF the Traffic Information function.
When the function is set to ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
SRC
4
MENU
¢
SEARCH MODE Volume