Kodak A-61167 - Manual (Page 62)

A-61167 April 2005 D-3
Using the flatbed
Use the flatbed to scan documents that cannot be scanned using the
automatic document feeder (ADF).
1. Raise the input tray and rest it against the scanner, if necessary.
2. Lift the flatbed cover and hold it up.
3. Place the document face down on the glass platen.
4. Position the document with the corner aligned with the arrow.
5. Close the flatbed cover.
6. Start scanning.
Book scanning You can use the flatbed to scan thick or bound documents, such as books. The
flatbed cover rises to accommodate bound materials. It can also be lifted off
and removed to allow scanning very thick books.
1. Raise the input tray and rest it against the scanner, if necessary.
2. Lift the flatbed cover and hold it up.
3. Place the book face down on the glass platen.
4. Position the book with the corner aligned with the arrow.
5. Close the flatbed cover.
6. Start scanning.
Arrow