Kodak A-61167 - Manual (Page 54)

C-12 A-61167 April 2005
Setting the
imprinter position
There are 14 possible positions for the imprinter. Make sure that the imprinter
is in the correct position for your documents.
1. Locate the imprinter access door on the back of the scanner.
2. Slide your fingers under the imprinter access door handle and pull the door
toward you.
3. Lift the imprinter access door off the scanner.
4. Locate the imprinter positioning slots.
5. Determine which position is suitable for your imprinting needs.
6. Lift the ink cartridge carrier out of its position.
7. Slide the ink cartridge carrier into the desired position.
8. Replace the imprinter access door.