Kenwood TH-D72E - Manual (Page 51)

APRS – 8
TRANSMITTING A MESSAGE
1 Press [MSG].
• The message list appears on the display.
2 Press [MENU].
• The message list menu appears on the display.
3 Press [ ]/[ ] or rotate the Tuning control to select
[Send].
4 Press [ OK] to send the message.
You can select the follows item other then [Send],
[Reply], [New] in message list menu.
Re-TX: Sending the message again.
Position: Search position information from a position
list.
POS Request: The position data of the transmitting
station is displayed (if the station data is available).
Unread: Change the existing reading message to
unread message.
ACCESSING RECEIVED APRS MESSAGES
This transceiver is capable of storing a maximum of 100
messages in memory. You can easily access one of
those.
1 Press [MSG].
• The message list appears on the display.
• The newer message the smaller number assigned; the
latest message is assigned 1.
2 Press [ ]/[ ] or rotate the Tuning control to select
the desired message using the cursor ( ).
• Press [ESC ]: Re tun to the frequency display.
• Press [MSG]: Makes the Reply message.
• Press [POS]: Displays the detailed data of the message
transmit station.
• Press [A/B]: Deletes the selected station.
3 Press [ OK].
• If you select an incoming message, the following display
appears:
• Rotate the Tuning control: Scrolls the message.
• Press [ESC ]: Re tun to the message list.
• Press [ OK]: Displays the next page.
• Press [MSG]: Responds to the party from whom you
received. Enters into message setting.
• Press [A/B]: Makes the transmitted message.
• If you select last page, the following display appears
(Sended date/ time/ line number):
• If you select one of your outgoing messages, the following
display appears:
• Rotate the Tuning control: Scrolls the message.
• Press [ESC ]: Re tun to the message list.
• Press [ OK]: Displays the next page.
• Press [MSG]: Responds to the party from whom you
received. Enters into message setting.