beautypg.com

Ctcss/ dcs/ cross tone – 2 ctcss frequency scan, Using dcs – Kenwood TH-D72E User Manual

Page 19

background image

CTCSS/ DCS/ CROSS TONE – 2

CTCSS FREQUENCY SCAN

This function scans through all CTCSS frequencies to
identify the incoming CTCSS frequency on a received
signal. You may find this useful when you cannot recall
the CTCSS frequency that the other persons in your group
are using.

1 Press [TONE] 2 times to activate the CTCSS function.

The “

” icon appears on the display when the CTCSS

function is On.

Each time you press [TONE], the selection changes as
follows:

Tone (

)

°

CTCSS (

)

°

DCS (

)

°

Cross

Tone (

: default)

°

Off (no display).

configured, Voice Alert ON is added to the above cycle.>

2 Press [F], [TONE] (1s).

Scan starts and

Scanning

blinks on the display.

To quit the scan, press [ESC

].

When a CTCSS frequency is identified, the identified
frequency appears on the display and blinks.

3 Press [

Ź (OK)] to program the identified frequency in

place of the currently set CTCSS frequency.

The CTCSS function will remain on. To cancel CTCSS,
press [TONE] until CT no longer appears on the display.

Press [ESC

] if you do not want to program the

identified frequency.

DCS

USING DCS

1 Select your desired band.

2 Press [TONE] 3 times to activate the DCS function.

The “

” icon appears on the display when the DCS

function is on.

Each time you press [TONE], the selection changes as
follows:

Tone (

)

°

CTCSS (

)

°

DCS (

)

°

Cross

Tone (

: default)

°

Off (no display).

configured, Voice Alert ON is added to the above cycle.>

3 Press [F], [TONE].

The current DCS code appears on the display and blinks.

4 Press [

]/[

] or rotate the Tuning control to select

your desired DCS code.

Refer to the table below for the available codes.

To exit the DCS code selection, press [ESC

].

5 Press [

OK] to complete the setting.

6 When you are called: The transceiver squelch opens

only when the selected DCS code is received.
When you make a call: Press and hold [PTT], then
speak into the microphone.

To cancel DCS, press [TONE] until DCS no longer
appears on the display.

DCS Code

023

025

026

031

032

036

043

047

051

053

054

065

071

072

073

074

114

115

116

122

125

131

132

134

143

145

152

155

156

162

165

172

174

205

212

223

225

226

243

244

245

246

251

252

255

261

263

265

266

271

274

306

311

315

325

331

332

343

346

351

356

364

365

371

411

412

413

423

431

432

445

446

452

454

455

462

464

465

466

503

506

516

523

526

532

546

565

606

612

624

627

631

632

654

662

664

703

712

723

731

732

734

743

754

This manual is related to the following products: