Gps – 5 log setup, Target point – Kenwood TH-D72E User Manual
Page 35
GPS – 5
LOG SETUP
Q Track Log Acquisition Type
You can set the conditions for saving portable Track
information as GPS Logger.
You can change the settings for travel speed, etc.
1 Enter Menu mode and access Menu 230.
2 Select “Time”, “Distance”, or “Beacon” for the
Record Method.
3 Access Menu 231.
4 Select an Interval time from 2 ~ 1800 seconds (in
steps of 1 second).
•
The Interval setting is available only if the Record
Method has been set to “Time”.
5 Access Menu 232.
6 Select a Distance from 0.01 ~ 9.99 (in steps of
0.01).
•
The Distance setting is available only if the Record
Method has been set to “Distance”.
•
The unites used for Distance can be set to miles (mi),
kilometers (km) or nautical miles (nm).
Interval and Log Total Time:
Point
Q'ty
Interval time (second)
2
5
10
15
30
2800
5000
166.7
41.7
833.3
1250
2500
150000
(min)
2.8
6.9
13.9
20.8
28
2500
(hour)
Interval and Total Distance:
Point
Q'ty
Interval distance (km)
0.01
2.00
4.00
6.00
8.00
9.99
5000
50
10000
20000
30000
40000
49950
(km)
TARGET POINT
You can register positional information for a target point.
1 Enter Menu mode and access Menu 240.
2 Select a Target Point (from 1 ~ 5).
3 Press [MHz]. The “in use” target point mark ( )
appears to the left of the channel number.
4 Access Menu 241.
5 Enter a Target Point name (up to 8 characters).
6 Access Menu 242.