Kawai CP205/CP185 - Manual (Page 23)

Basic Controls P. 17
• The Indicator light on the CHORUS button will be lit only when Chorus is turned on for the
active “Priority Part”. See “Effect Priority Guidelines” later in this chapter for an explanation of
this.
• You can select from four chorus types when in the Chorus Settings menu. There is a fifth chorus
type which is assigned as an Effect from the Effect Settings menu. In this way, you can actually
have two chorus effects active if so desired.
5) Turn the Dial to change the value.
6) Press the EXIT button to leave the Chorus Settings menu.
7) If you wish to turn the chorus off, press the CHORUS button again.
L2 Selects the Chorus type. Use the Dial to choose
one of the 4 Chorus types.
L3 Selects Chorus on/off. Use the Dial to turn the
Chorus on/off for the selected Part.
L4 Selects Chorus depth. Use the Dial to change
the Chorus depth for the selected Part.
F3–F6 Selects the Part you want to change. Repeatedly pressing the
appropriate button also turns the Chorus on/off for that Part.
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5