Sharp FO-2970M - Manual (Page 54)

Sending a Fax by Automatic Dialing
52
Sending a Fax by Automatic Dialing
You can dial a fax or telephone number by simply pressing a Rapid
Key, or by pressing the SPEED DIAL key and entering a two-digit
number.
To use a Rapid Key or Speed Dial number, you must first program the
full fax number in the Rapid Key or Speed Dial number. It is usually
convenient to program your most frequently dialed numbers in Rapid
Keys.
♦ 20 Rapid Keys and 100 Speed Dial numbers are available.
♦ You can also store an area code or access code in a Rapid Key or
Speed Dial number.
♦ You can use a Rapid Key or Speed Dial number to send a fax as an
E-mail attachment to an E-mail address. To program a Rapid Key or
Speed Dial number for E-mail, see Programming Rapid Key and
Speed Dial Numbers in Chapter 5 of your online operation guide.
Rapid Keys
SPEED DIAL key
Attach the Rapid Key labels above the Rapid Keys
as shown here. When you store a number in a
Rapid Key, write the name of the party on the label.
2 1 3
5 4 6
8 7 9
0
all-fo2970.book Page 52 Monday, July 24, 2000 7:45 AM