Sharp FO-2970M - Manual (Page 49)

Adjusting the Resolution and Contrast
47
2. Sendi
ng
Doc
u
ments
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
Note: The resolution and contrast settings are only effective for sending and
copying a document. They are not effective for receiving a document.
Resolution settings
Contrast settings
STANDARD Use STANDARD for ordinary documents.
This setting gives you the fastest and most
economical transmission.
FINE Use FINE for documents containing small
letters or fine drawings.
SUPER FINE Use SUPER FINE for documents containing
very small letters or very fine drawings.
HALF TONE Use HALF TONE for photographs and
illustrations. The original will be reproduced
in 64 shades of gray.
AUTO Use AUTO for normal documents.
DARK Use DARK for faint documents.
You must adjust the
settings each time you
don’t want to use the
default settings. The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.
all-fo2970.book Page 47 Monday, July 24, 2000 7:45 AM