Sharp FO-2970M - Manual (Page 26)

Setting Up the Multifunction Interface
24
Setting Up the Multifunction Interface
Connecting the parallel cable
Connect the fax machine to your computer with a parallel cable.
♦ If you do not already have a parallel cable, you can purchase one
from your dealer or any computer store.
♦ Make sure the cable is IEEE 1284-compliant. We recommend a
shielded cable no longer than 6 feet.
1
Make sure your computer is turned
off and the fax machine is unplugged.
To enable the multifunction
features of your fax,
connect it to your computer
and install the Multifunction
software.
all-fo2970.book Page 24 Monday, July 24, 2000 7:45 AM