Sharp FO-2970M User Manual
Page 16
Connections
14
Connecting the telephone line cord
Insert one end of the line cord into the jack on the left of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Note: Your fax is set for tone dialing. If you are on a pulse dial line,
you must set your fax for pulse dialing. Press the keys on the
operation panel as follows:
1
Press these keys:
The display will show:
2
Press 1 to select tone dialing, or 2 to
select pulse dialing.
3
Press the STOP key to return to the
date and time display.
Be sure to insert
the line into the
TEL. LINE jack.
Do not insert it into
the TEL. SET jack.
STOP
or
TONE
PULSE
1
2
4
FUNCTION
DIAL MODE
1=TONE, 2=PULSE
all-fo2970.book Page 14 Monday, July 24, 2000 7:45 AM