Symbol Technologies MC9000-K - Manual (Page 282)

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide 7-26
Spare Battery Insertion and Removal
To insert a spare battery:
1. Insert the battery into the spare battery charging slot in the back of the cradle as shown.
Figure 7-16. Inserting the Vehicle Cradle
2. Push the battery in. Listen for the click that signifies the battery’s latch has locked the
battery into place.
To remove the spare battery, press in the battery latch, then remove the battery from the spare battery
slot.
Spare Battery Charging
1. Ensure the cradle is connected to a power source, see Power Connection on page 7-20 .
2. Insert the spare battery into the cradle, see Spare Battery Insertion and Removal on
page 7-26 .
The spare battery charging LED blinks amber to indicate charging, then turns solid amber when the
battery is completely charged. The battery charges in approximately four hours, see
LED Indicators on
page 7-27 for other indications.
Spare battery
latch