Symbol Technologies MC9000-K - Manual (Page 174)

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide 4-16
Ethernet Setup
The Ethernet connection can only be established with the Four Slot Ethernet cradle. To establish a
connection between the mobile computer and the host computer to communicate over an Ethernet
network, perform the following:
• Install MobileDox Cradle Manager
• Install eConnect
• Mobile computer configuration
• Host computer configuration
• DHCP server configuration
• Cradle configuration.
Installing MobileDox Cradle Manager
MobileDox Cradle Manager is used only when establishing a connection
using the Four Slot Ethernet Cradle.
The Cradle Management software features:
• View cradles that are attached to the network via MobileDox Net
• View cradle status
• Modify cradle settings including:
• IP address settings
• DNS and WINS settings
• Identification settings
• USB port specific settings
• Restart cradles connected to the network via MobileDox Net
• Update the firmware of MobileDox Net.
To install the Cradle Management Software on the host computer, download the latest version of the
software from
http://devzone.symbol.com . Refer to the instructions included with the software.