Siemens CL-110-I - Manual (Page 13)

Chapter 3: Configuration
For connecting through a hub, please refer to the following diagram for an example.
9 VAC
Install the USB Driver
For Windows ME
n
Run the USB installation program from the CD provided by your device package.
o
An InstallShield Wizard will appear. Please wait for a moment.
p
When the welcome screen appears, click Next for next step.
q
When the InstallShield Wizard Complete appears, click Finish.
r
Plug the USB cable between your device and PC.
Note: If the USB device is not detected, check the USB cable
between the PC and the device. Also verify that the device is
power on.
s
The system will detect the USB driver automatically. Now, the system will copy the proper
files for this device.
t
When the file copying finished, the dialog above will close. Now the USB driver is installed
properly. You can use the device.
For Windows 2000
n
Run the USB installation program from the CD provided by your device package.