Turning on the power – Savin SDC410 User Manual

Page 44

Basics

Turning on the Power

Press the operation switch to make the On indi-
cator lights up.

Note

❐

If the power is not turned on when the operation switch
is pressed, check if the main power switch is on. If off,
turn it on.

❐

During the warm-up period (about 9 minutes), you can
use the Auto Start function.

☛

See page 56.

When the machine is set for user codes

Enter your user code using the Number keys.
Then press the # key.

Note

❐

To prevent others from making copies with your user code, press the Clear Modes key and the Clear /Stop key
simultaneously after copying.

Reference

For setting user codes,

☛

see page 196.

When the Energy Saver indicator is lit

The machine is in Energy Saver mode.

Press any key.

The machine will return to the ready condition.

Note

❐

The machine will also return to the ready condition when an original is set in the document feeder, or when the platen
cover or the document feeder is opened.

Starting the Machine