Machine exterior – Savin SDC410 User Manual

Page 17

Machine Exterior

1. Exposure glass

Position originals here face down for copying.

(platen glass)

2. Platen cover (option)

Lower this cover over originals placed on the exposure glass (platen glass)
for copying.

3. Operation switch

Press this switch to turn the power (on the On indicator lights up). To turn
off the power off, press this switch again (the On indicator goes off).

4. Operation panel

☛

See page 5.

5. Front cover

Open to access the inside of the machine.

6. Paper tray

Set paper here.

☛

See page 172.

7. Auto duplex tray

Use to make two-sided copies.

8. Stopper

When you copy onto thin paper, raise this to prevent curling.

9. Copy tray

Completed copies are delivered here.

10. Main power switch

To start the machine, turn on this switch.

Note

❐

If the machine does not operate after turning on the operation switch,

check if the main power switch is turned on. If it is off, turn it on.