Description of controls – Smeg PIRO10NE User Manual

Page 9

Description of controls

2.2.5 Adjusting alarm volume
The acoustic alarm has three different settings. These can be operated,
while the alarm is sounding, by pressing key

2.2.6 Switching off the alarm
The alarm switches off automatically after seven minutes. It can be
manually turned off by pressing key

2.2.7 Minute-counter
The programmer can also be used as a simple minute counter.

IMPORTANT : THE USE OF THE MINUTE-COUNTER WILL NOT INTERRUPT OVEN

OPERATION AT THE END OF THE SET TIME.

By pressing key

, the display shows

; keep the key pressed and

at the same time press keys

. By releasing the key

, the

programmed count starts and the symbols

and

appear on the

monitor.

NOTE :

AFTER PROGRAMMING THE MINUTE-COUNTER, THE DISPLAY WILL SHOW
THE RIGHT TIME. TO DISPLAY REMAINING TIME, PRESS KEY

IMPORTANT : WRONG SETTINGS ARE PREVENTED LOGICALLY (E.G., ANY CONFLICT

BETWEEN END OF COOKING TIME AND A LONGER TIME WILL NOT BE
ACCEPTED BY THE PROGRAMMER).

2.2.8 Cancellation of set data
Once the programme has been set, keep the key of the function to be
cancelled pressed, while at the same time

is reached by means

of variation keys

. Time cancellation will be considered as end-

of-cooking time by the programmer.

2.2.9 Changing the set data
The cooking data entered can be changed at any time by keeping the
function key pressed and at the same time adjusting the keys