Smeg PIRO10NE - Manual (Page 10)

Description of controls
2.3 C
LOCK AND PROGRAMMER
36
IMPORTANT :
THE KNOB A MUST ALWAYS BE TURNED ANTICLOCKWISE .
2.3.1 Setting the clock
To set the correct time,
PRESS
and turn knob A anticlockwise.
NOTE :
BEFORE SETTING THE PROGRAMMER ACTIVATE THE DESIRED FUNCTION
AND TEMPERATURE.
2.3.2 Semiautomatic cooking
Use this setting for automatic oven switch-off at the end of cooking time.
Turn the knob A anticlockwise to set the cooking time in the window B.
2.3.3 Automatic cooking
Use this setting to automatically start and stop the oven.
Turn the knob A anticlockwise to set the cooking time in the window B.
PULL and turn the knob A anticlockwise so the arrow C coincides with
start of desired cooking time.
2.3.4 End of cooking
When cooking is over, the oven will automatically switch off and, at the
same time, an intermittent alarm will sound.
2.3.5 Switching off the alarm
The alarm can be switched off manually by turning the knob A
anticlockwise until symbol
appears in window B.
IMPORTANT : TO USE THE OVEN MANUALLY AFTER PROGRAMMING, TURN THE KNOB A
UNTIL THE SYMBOL APPEARS IN WINDOW B.