SATO M5900RVe User Manual
Page 66
Unit 6: Maintenance
SATO M5900RVe Operator Manual
PN 9001125A
Page 6-8
PRINT HEAD ALIGNMENT
Print head position has a direct impact on print quality. An improperly aligned print head will
cause the print to be inconsistent across the label. The following procedure will provide guidance
on print head alignment.
1 Remove power and disconnect the power supply cord.
2 Open the right housing cover to access and open the print assembly (1, Figure 6-6).
3 Detach lever guard (2), loosen two set screws (3), and one mounting screw (4).
4 Manipulate print head assembly (5) so that it is parallel with platen roller (6).
5 Secure mounting screw (4), two set screws (3), and attach lever guard (2).
6 Close the right housing cover and restore power.
Figure 6-6, Print Head Alignment
2
1
4
3
6
1
5