SATO M5900RVe - Manual (Page 38)

Unit 4: Operation
SATO M5900RVe Operator Manual PN 9001125A Page 4-14
CARD MODE
This configuration mode is used for configuring the Flash ROM and/or PCMCIA interface cards.
The following table identifies the menus of the Card Mode and their purpose. The flow chart after,
sequences the operator, printer, and host interface activities.
Figure 4-8, Card Mode
ADVANCED MODE
LINE + POWER
LINE
Printer beeps.
CARD MODE
LINE & FEED
Alternately
CARD->MEMORYCOPY
TRUETYPEFONT Y/N
CARD->MEMORYCOPY
SATOFONT Y/N
MEM SELECT(CC1)
CARD MEMORY
CARD->MEMORYCOPY
ALL Y/N
MEMORY->CARDCOPY
ALL <0MB> Y/N
CARD->MEMORYCOPY
PROGRAM Y/N
MEMORY->CARDCOPY
PROGRAM Y/N
CARD FORMAT
YES NO
MEMORY FORMAT
YES NO
Printer
processes each
time the FEED key
is pressed.