SATO M5900RVe - Manual (Page 33)

Unit 4: Operation
SATO M5900RVe Operator Manual PN 9001125A Page 4-9
DEFAULT SETTINGS MODE
When the sequences have been completed, the printer automatically returns to its default gap or
eye-mark settings. The default settings are those programmed settings of the factory prior to
delivery.
Figure 4-4, Default Settings Mode
Yes / No
DEFAULT SETTING
YES NO
LINE + FEED +
POWER
LINE
Printer beeps.
Scrolls
options each time
the LINE key is
pressed.
POWER = OFF FEED
Beeps
3 times and
returns default
settings.
DEFAULT SETTING
COMPLETED