Sharp AR-M451N - Manual (Page 86)

4-6
STORING, DELETING, AND USING
ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
copy that size of document.
● To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.
Storing or deleting an original size
1 Touch the [ORIGINAL] key.
2 Touch the [CUSTOM SIZE] key.
3 Touch the [STORE/DELETE] key.
4 Touch the original size key ( ) that
you wish to store or delete.
To store an original size,
touch a key that does not
show a size (
).
Keys that already have
an original size stored
will show the stored size
(
).
To delete or change a stored size, touch the key
that shows the size that you wish to delete or
change.
●If you are storing an original size, go to step 5.
●To delete or change an original size, go to
step 7.
5 Enter the X (width) and Y (length)
dimensions of the original with the
keys.
X (width) is initially
selected.
Enter X and then touch
the (
) key to enter Y.
A width of 64 to 432 mm
can be entered in X, and
a length of 64 to 297 mm
can be entered in Y.
6 Touch the [OK] key.
The original size entered in step 5 is stored in the
key selected in step 4.
To exit, touch the [ORIGINAL] key.
7 When you touch a key that shows an
original size in step 4, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
●To cancel the procedure, touch the [CANCEL]
key.
●To delete the selected original size, touch the
[DELETE] key.
●To change the original size stored in the key,
touch the [AMEND] key. The screen of step 5
will appear to let you change the size.
8 To exit, touch the [ORIGINAL] key.
■ ■ ■ ■ USING A STORED ORIGINAL SIZE
1 Follow steps 1 to 2 of "STORING OR
DELETING AN ORIGINAL SIZE".
2 Touch the original size key that you wish
to use.
3 Touch the [OK] key.
The stored original size is called up.
AUTO
ORIGINAL
EXPOSURE
0
AUTO
E INPUT
CUSTOM
SIZE
EXPOSURE
PAPER SE
COPY RAT
100%
AUTO
AUTO A4
MANUAL
AUTO
INCH
AB
L STORE/DELETE
CUSTO
SIZE
MANUA
AUTO
RECALL STORE/DELETE
X68 Y78
X68 Y78
CANCEL OK
420
297
(64 432)
mm
RECALL
Y
X
A
X
Y
STORE/DELETE
(64 297)
mm
RECALL STORE/DELETE
X68 Y78
04.fm 6 ページ ２００４年１０月２６日 火曜日 午後５時４５分