Sharp AR-M451N - Manual (Page 74)

SADDLE STITCH FINISHER
3-20
■ ■ ■ ■ Staple jam removal
1 Unlatch the saddle stitch finisher and slide
it away from the machine.
2 Open the front cover.
3 Turn roller rotating knob C as shown in the
illustration until the blue indication is
seen.
4 Remove the paper from the stapler
compiler.
5 If saddle stitch was selected, open the
saddle stitch section cover.
6 Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
7 Close the saddle stitch section cover.
8 Open the front cover and pull out the
stapler unit.
Roller rotating
knob C
Blue
Copy_EX.book 20 ページ ２００４年９月２８日 火曜日 午後９時５４分