Sharp AR-M451N - Manual (Page 68)

3-14
SADDLE STITCH FINISHER
The saddle stitch finisher can automatically place two staples for centreline binding of prints or copies and fold them
along the centreline.
An optional hole punching unit is available for installation into the finisher.
Part names
Specifications
(Continued on next page)
NOTES
● Do not press on the saddle stitch finisher (particularly the offset tray).
● Be careful about the offset tray during printing because the tray moves up and down.
● The saddle stitch finisher requires the installation of other peripheral devices in order to be functional and cannot
be installed together with some other devices. The table on page 8-4 shows the configurations which are
compatible.
Name Saddle stitch finisher (AR-FN7)
Number of trays 2
Paper output Print face down
Tray system Upper tray: offset tray, Lower tray: saddle stitch tray
Tray capacity
Upper tray:
Non-stapling: Max. 1,000 sheets for A4 or 8-1/2" x 11" or smaller sizes (80 g/m
2 or 20
lbs.), max. 500 sheets for B4 or 8-1/2" x 13" or larger sizes (80 g/m 2 or 20 lbs.)
Stapling: Max. 50 stapled sets and max. 1,000 sheets for A4 or 8-1/2" x 11" or smaller
sizes (80 g/m
2 or 20 lbs.), max. 30 stapled sets and max. 500 sheets for B4 or 8-1/2"
x 13" or larger sizes (80 g/m 2 or 20 lbs.)
Lower tray: Stapled print capacity is (6 - 10) sheets x 10 sets or (1 - 5) sheets x 20
sets.
Paper size
Upper tray: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"R
Lower tray: max. A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Paper weight
Upper tray: 60 to 205 g/m 2 or 16 to 54 lbs.
Lower tray: 64 to 80 g/m 2 or 17 to 34 lbs.
Paper types
Upper tray: plain paper, thick paper, transparency film
Lower tray: plain paper only
Tray full detection Provided in both trays
Offset function Upper tray only
Paper sizes for stapling
Upper tray: A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", and 8-1/2" x 11"R,
Lower tray: A3, B4, A4R, 11" x 17", and 8-1/2" x 11"R
Saddle stitched output is delivered
here.
Saddle stitch tray
Output which is stapled or offset will
be delivered to this tray.
Offset tray Open the front cover and
pull out this section to
replace the staple
cartridge or to remove
jammed staples.
Stapler section
Paper to be stapled is stacked
temporarily.
Stapler compiler
Open the front cover and pull out this
section for staple cartridge replacement
or to remove jammed staples.
Front cover
Open for misfeed removal.
Top cover
03.fm 14 ページ ２００４年１０月２６日 火曜日 午後５時３９分