Sharp DV-AT4000 - Manual (Page 33)

33
DV-AT4000
Video CD and Super Video CD Operation
- Video C
D
, Su
pe
r Video CD
p
la
y
bac
k
-
" To play in the desired order (programmed
play)
You can play back the desired tracks in the sequence you want.
Maximum of 19 tracks can be programmed.
To change the programmed contents:
Notes:
! Programming cannot be performed while paused or in the playback mode.
! Sequence programming does not work with a disc that disables programming.
! To exit the programming procedure halfway through, press the P.MODE button.
! To check the status during the programmed play, press the P.MODE button.
! When operating SVCD/VCD with the P.B.C. function, set the sequential play mode
to SEQ.2 (see page 30).
1
While stopped, press the P.MODE
button.
Information on all the loaded discs is read,
and then the programming screen ap-
pears.
2
Press the button.
3
Press the or button to select
"Add" and press the ENTER button.
4
Press the or button to select a
disc number and press the ENTER
button.
5
Press the or button to select a
track number and press the ENTER
button.
NO Disc Index
RIGHT ARROW first, then select command. To play,
press PLAY, to quit, press PROGRAM.
Favorite List
NO Disc Index Add
Insert
Modify
Delete
Clea
r
Favorite List
NO
Favorite List
Disc Index Disc1
Disc2
Disc3
Disc4
Disc5
NO
Favorite List
Disc Index 1
2
3
4
6
Repeat steps 2 - 5 for other tracks.
Up to 19 tracks can be pro-
grammed.
7
Press the / button to start play.
! "PROG." lights up on the main unit dur-
ing programmed play.
! Programmed selections are memorized until a disc is removed or you turn the
power off.
! The / button does not allow you to operate programmed play if the button
is pressed. In this case, press the P.MODE button to show the programming
screen and then press the / button.
! Select one of the programmed tracks with the or button and then press
the / button. Playback will start from the selected track.
1 While stopped, press the P.MODE button.
2 Use the or button to select an item and then press the button.
3 Use the or button to select the desired command and then press the ENTER
button.
"Add"
Adds a track to the program.
"Insert" Adds a track between programs. In this case, insertion is made above
(before) the selected program.
"Modify" Modifies the program.
"Delete" Deletes the selected program.
"Clear"
Deletes all programs.
NO
Favorite List
Disc Index
1
2
3
4 4
3
2
1 Track1
Track2
Track3
Track4