Sharp DV-AT4000 - Manual (Page 28)

28
DV-AT4000
SHARP
9
H
X5
5
7
6
9
1
5
0
D
V
D Oper
ation
- Us
eful oper
a
ti
o
n
-
Useful operation (continued)
" To change the angle
You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
Notes:
! Some DVDs prohibit changing the angle.
! Refer to the manual of the disc as the operation may vary depending on the disc.
" Playing back from the desired point (book-
mark)
During playback, make bookmarks. Playback can be resumed from the points. Up to
six bookmarks can be used per disc.
" To recall book marked position
Notes:
! The bookmark function is not available for some discs.
! When operating SVCD/VCD with the P.B.C. function, set the sequential play mode
to SEQ.2 (see page 30).
1
While a disc is playing, press the
ANGLE button.
Angle information
Angle information does not appear if not re-
corded on the disc.
Press the ON SCREEN button on the re-
mote control to check angle information
(see page 31).
2
Within 3 seconds, press the ANGLE button repeatedly to select the
desired angle.
ENG 1/6 CH1 1/2 1/2
1
While a disc is playing, press the
RANDOM button.
The bookmark screen is displayed.
2
Press the or button to select the desired bookmark number and
then press the ENTER button at the desired points.
If you enter a wrong point, press the CLEAR button and retry.
3
Press the RANDOM button to exit the bookmark screen.
Book mark selections are memorized until a disc is removed or to turn the power
off.
1
While a disc is playing, press the RANDOM button.
2
Press the or button to select a bookmark number, and then
press the / button.
Bookmark