Dv d oper ation, Fast forward/fast reverse (search) – Sharp DV-AT4000 User Manual

Page 25

DV-AT4000

D Oper

ation

- B

ic o

Fast forward/Fast reverse (search)

You can search the desired point as you play the disc.

Notes:

On some discs, the search function is disabled.

On a DVD, search does not operate between titles.

While searching on a DVD or video CD the sound is not heard and the subtitles will
not appear. With an audio CD you will not hear the sound.

When search is performed during the DVD playback, pictures may not be for-
warded or reversed in the search speed specified in this manual, depending on the
disc or the scene being played.

The same operation can be performed by holding down the

button on

the main unit for 2 seconds or more.

To start playback from the desired point
(direct play)

You can playback from desired title (track).

Notes:

The direct play function is not performed with discs on which no titles (tracks) are
recorded.

Direct play feature is disabled on some discs.

Playback starts from the first chapter of the title.

Playback does not start if you specify a title (track) number that is not listed on the
disc.

When operating SVCD/VCD with the P.B.C. function, set the sequential play mode
to SEQ.2 (see page 30).

To select a subtitle or audio language from
the disc menu

You can select the desired subtitle or audio language and sound system on your DVD
if it has a disc menu.

Note:

The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends on the disc you are using. See the disc jacket for
details.

While a disc is playing, press the
or

button.

The scanning speed will change as follows at each press of the button.

The disc is forwarded by the

button and reversed by the

button.

Press the / button to return to the normal playback.

Fast Play

Fast Play / Fast Back Play

Scan Forward 1 / Scan Backward 1

Scan Forward 2 / Scan Backward 2

Scan Forward 3 / Scan Backward 3 (Only for DVD)

Scan Forward 4 / Scan Backward 4 (Only for DVD)

Play

While in the stop or playback mode, press the direct number buttons
(0 - 9) to select the title (track) number.

Playback starts in 3 seconds.

To enter title (track) numbers of 2 digits or more, press the direct number buttons
within 2 seconds.

While the disc is stopped or played,
press the TOP MENU button to dis-
play the disc menu.

Example

Press the , , or button to change the setting and press the
ENTER button.

You can also use the direct number buttons for some discs.

1.Highlights
2.Start Movie