General information, Controls and indicators (continued), Speaker system – Sharp MD-E9000H User Manual
Page 9: Speaker connection
9
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
General Information
- Controls and Indicators -
MD-E9000H
■
Speaker System
0
1.
Tweeter
0
2.
Woofer
0
3.
Bass Reflex Duct
0
4.
Speaker Terminals
Make sure nothing comes into contact with the speaker diaphragms when you re-
move the speaker grilles.
Controls and Indicators (continued)
Placing the speaker system:
There is no distinction between the right and the left speakers.
1
2
3
4
Left speaker
Right speaker
■
Speaker connection
Connect the black wire to the minus (-) terminal and the red wire to the plus (+)
terminal.
Caution:
●
Connect the speaker wires to the speakers first, then to the unit.
●
Use speakers with an impedance of 4 ohms or more, as lower impedance speak-
ers can damage the unit.
●
Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
●
Do not let the bare speaker wires touch each other.
Incorrect
Incorrect
Black
Red
11
12
10
9
8
6
7
5
4
3
2
1
*MD9000H-E04-09
2001.4.20, 2:51 AM
9