Md editing, Editing a recorded minidisc (continued) – Sharp MD-E9000H User Manual

Page 40

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

MD Editing

- Editing a Recorded MiniDisc -

■

To erase all of the tracks at once

Press the MD

■

button and load a MiniDisc (see page 17).

Whilst in the stop mode, press the NAME/TOC button, and within
10 seconds, select “ALL ERASE” using the

5/3

2/4

button.

Within 10 seconds, press the MEMORY/ENTER button.

●

To cancel the operation, press the MD

■

button.

Press the MEMORY/ENTER button again.

●

All of the track numbers and track names will be erased.

Note:
This function cannot be used in the random play mode.

Caution:
Once a track has been erased, it cannot be recovered.
Check the track number before erasing it.

■

To erase a track

Press the MD

■

button and load a MiniDisc (see page 17).

Whilst in the stop mode, select the track you want to erase using
the

5/3

2/4

button. Or start playing the track and then

press the MD

button.

Press the NAME/TOC button, and within 10 seconds, select
“ERASE” using the

5/3

2/4

button.

Within 10 seconds, press the MEMORY/ENTER button.

●

To cancel the operation, press the MD

■

button.

Press the MEMORY/ENTER button again.

●

The track is erased, and the unit is stopped at the beginning of the next
track.

To erase other tracks, repeat steps 1 - 5.

Notes:

●

When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.

●

When a track is erased, the track name will be erased at the same time.

●

This function cannot be used in the random play mode.

■

To erase programmed tracks (programmed
erase)

You can erase several tracks at once.
1 Programme them (steps 1 - 5, page 19).
2 Press the NAME/TOC button, and select “PRGM ERASE” using the

5/3

2/4

button.

3 When “PRGM ERASE?” appears, press the MEMORY/ENTER button twice.

Editing a Recorded MiniDisc (continued)

*MD9000H-E36-40

2001.4.20, 2:14 AM