Sharp MD-E9000H - Manual (Page 32)

32 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
MD Recording
- Recording to a MiniDisc from a CD -
Recording to a MiniDisc from a CD
■ Recording to a MiniDisc from a CD (One-
Touch Editing)
A CD can be recorded to a MiniDisc, starting from the first track, with one-touch
operation.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD
H H H H H
button.
3
Load a CD and a recordable MiniDisc.
● The total number of tracks and the total playing time on the CD will be
displayed.
4
Press the REC MODE button to select a recording mode.
Recording on 80-minute MD
SP:
Stereo recording, maximum 80 minutes
LP2: 2 times long recording (stereo), maximum 160 minutes
LP4: 4 times long recording (stereo), maximum 320 minutes
● The recording mode cannot be changed whilst recording.
● The recording mode remains unchanged until another mode is selected.
5
Press the HIGH or NORMAL button.
● Press the NORMAL button for actual speed, HIGH for high-speed record-
ing.
● Recording will begin, starting from the first track of CD.
● After recording (all of the tracks that can be recorded), the unit will stop
automatically.
To check the remaining recording time:
Whilst in the stop mode, press one of the REC MODE buttons (SP, LP2 or LP4). The
remaining time will be displayed according to the pressed REC MODE button.
To stop recording:
Press the MD ■ or CD ■ button.
● Playback and recording will stop and the track numbers will be written on the MiniDisc.
Caution:
● Check whether recording is performed or not with the level meters.
● When a damaged CD is recorded at high speed, the unit may stop whilst recording,
or some noise or a drop out may be recorded. In this case, record the CD at normal
speed.
*MD9000H-E31-35 2001.4.20, 2:13 AM 32