Md playback, Listening to a minidisc (continued) – Sharp MD-E9000H User Manual
Page 18
18
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
MD Playback
- Listening to a MiniDisc -
■
To locate the beginning of a track
To move to the beginning of the next track:
Press the
4
4
4
4
4
button for less than 0.5 seconds during playback.
●
You can skip to any track by pressing the
4
button repeatedly until the de-
sired track number appears.
To restart the track being played:
Press the
5
5
5
5
5
button for less than 0.5 seconds during playback.
●
You can skip to any track by pressing the
5
button repeatedly until the de-
sired track number appears.
■
To locate the desired portion
For audible fast forward:
Press and hold down the
4
4
4
4
4
button during playback.
For audible fast reverse:
Press and hold down the
5
5
5
5
5
button during playback.
Notes:
●
Normal playback will resume when the
5
or
4
button is released.
●
When the end of the last track is reached during fast forward, “END” will appear in
the display and MiniDisc operation will be paused. When the beginning of the first
track is reached during fast reverse or the
5
button is released, the unit will
enter the playback mode.
●
The
5/3
or
2/4
button on the remote control allows you the same opera-
tions.
Listening to a MiniDisc (continued)
To interrupt playback:
Press the MD
06
button.
To resume playback from the same point, press the MD
06
button again.
To stop playback:
Press the MD
■
button.
To remove a MiniDisc:
Whilst in the stop mode, press the MD
7
button.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
●
If TV or radio interference occurs during MiniDisc operation, move the unit away
from the TV or radio.
●
Although MiniDiscs will not normally skip due to vibration, you may hear skipping
in the sound if there is continuous vibration.
If the volume is turned up too high, sound skipping may occur depending on the
contents of the MiniDisc.
If this happens, turn the volume down and the skipping should stop.
●
If an error message is displayed during MiniDisc operation, see “Error Messages”
on page 45.
*MD9000H-E17-18
2001.4.20, 2:07 AM
18