Sharp MD-E9000H - Manual (Page 46)

46 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
References - Error Messages -
Error Messages
Error messages
BLANK MD
Can’t COPY
Can’t EDIT
Can’t READ
(
:Number or
symbol)
Can’t REC
Can’t WRITE
DISC FULL
Er-CD 20
Er-MD
( :Number or
symbol)
EDIT OVER
MD NO DISC
CD NO DISC
Remedy
● Replace it with another disc.
● Replace the CD.
● Change the stop position of the
track and then try editing it.
● Replace it with another disc.
● Erase the disc and try record-
ing again.
● Re-record or replace the
MiniDisc.
● Set this unit to the stand-by
mode and try to write the
TOC again. (Remove any
source of shock or vibration
whilst writing.)
● Replace the disc with another
recordable disc.
● Set this unit to the stand-by
mode and turn the power on
again.
● Set this unit to the stand-by
mode and turn the power on
again.
● Decrease the number of
tracks.
● Replace it with a disc that has
enough time to record.
● Load a MiniDisc.
● Reload the MiniDisc.
● Load a CD.
● Reload the CD.
Meaning
● Nothing is recorded.
(Neither music nor disc name
is recorded.)
● You tried to record from a
copy prohibited CD.
● A track cannot be edited.
● The disc is damaged.
● TOC information cannot be
read.
● MiniDisc not specified.
● Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
● The TOC information could
not be created properly due
to a mechanical shock or to
scratches on the disc.
● The disc is out of recording
space.
● The CD cover is not working
properly.
● MiniDisc is not working prop-
erly.
● You chose 21 or more tracks
for track editing.
● The remaining time available
for recording is short.
● A MiniDisc has not been
loaded.
● The MiniDisc data cannot be
read.
● A CD has not been loaded.
● The CD data cannot be read.
When an error message is displayed, proceed as follows:
Meaning
● The number of characters for
the disc name or track name
exceeds 40.
● The data recorded on this
disc is not audio data.
● You tried to record on a play-
back-only disc.
● The disc is write protected.
● The temperature is too high.
● TOC information recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.
● There is no space left for re-
cording track numbers.
● There is no space left for re-
cording character informa-
tion.
● The data contains an error.
● MiniDisc not specified.
● MiniDisc is not working prop-
erly.
● Tuner is not working properly.
Error messages
NAME FULL
NOT AUDIO
PLAYBACK MD
PROTECTED
TEMP OVER
TOC FORM
( :Number or
symbol)
TOC FULL
TOC FULL1
? MD DISC
POWER?
ER-TU
(
:Number or
symbol)
Remedy
● Shorten the disc or track
name.
● Select another track.
● Replace the disc.
● Replace it with another re-
cordable disc.
● Move the write protection tab
back to its original position.
● Set this unit to the stand-by
mode and wait for a whilst.
● Replace it with another disc.
● Erase the disc and try record-
ing again.
● Replace it with another re-
cordable disc.
● Replace it with another re-
cordable disc.
● Erase the needless charac-
ters.
● Replace it with another disc.
● Set this unit to the stand-by
mode and turn the power on
again.
● Set the unit to the stand-by
mode and turn the power on
again.
*MD9000H-E44-48 2001.4.20, 2:16 AM 46