Sharp MD-E9000H - Manual (Page 20)

20 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced CD/MD Playback
- Direct Play / Repeat or Random Play -
Direct Play
You can select the CD or MD playback mode; “Repeat play”, “Random play” and
“Normal play”.
1
When in the CD or MD mode, press the P-MODE button on the
remote control repeatedly to select the playback mode.
2
Press the CD
06 06 06 06 06
or MD
06 06 06 06 06
button to start playback.
To repeat a programmed sequence:
Perform steps 1 - 5 in the “Programmed Play” section and then select the repeat
playback.
Notes:
● During programme operation, random play is not possible.
● After using repeat play, be sure to press the CD ■ or MD ■ button. Otherwise, the
disc will play continuously.
● The random play will stop automatically when all tracks are played once. (The
same track will not be played back twice.)
● In random play, the CD or MiniDisc player will select and play tracks automati-
cally. (You cannot select the order of the tracks.)
To cancel repeat or random play:
Press the P-MODE button repeatedly to select the normal playback mode.
When in the CD or MD mode, press the direct buttons to select the desired track.
To select a track between the 11th and 99th tracks:
Select the track after pressing the
Y
10 button.
A. For example, to choose 28
1 Press the “
Y
10” button.
2 Press the “2” button.
3 Press the “8” button.
To select a track beyond the 100th track (MD only):
Select the track after pressing the
Y
10 button twice.
B. For example, to choose 105
1 Press the “
Y
10” button twice.
2 Press the “1” button.
3 Press the “10/0” button.
4 Press the “5” button.
Repeat or Random Play
Repeat playback mode
Normal playback mode
Random playback mode
*MD9000H-E19-21 2001.4.20, 2:08 AM 20