Siemens Hicom cordless EM - Manual (Page 20)

20
Putting the mobile unit into service
e.g.
H
...
Enter the mobile unit system code
(eight-digit) and confirm the entry with
the display key –
*
symbols are dis-
played instead of digits.
if necessary, press the display keys
and to correct an
entry.
-!
*, for example, is displayed.
The mobile unit is successfully logged
on (registered) if the ring symbol
flashes (this can take up to 30 sec-
onds).
The mobile unit ready to receive or
transmit calls if this display is retained.
OOOOOOOO
9
:
-!
-!
Note:
● Base/system: cordless EM mobile units are not logged
onto bases (base stations), but rather onto the Hicom
150 E telephone system. In this case,
-!
always
means DECT** system.
● No ring symbol is displayed if the logon procedure was
unsuccessful.
* See note "Base/system"
** DECT = Digital Enhanced Cordless Telecommunications