Siemens Hicom cordless EM - Manual (Page 10)

10
● Integrated power saving function: If you leave the base
station radio range when the mobile unit is switched on,
the interval between synchronisation attempts gradually
increases – this increases the battery life in standby
mode.
To ensure that the mobile unit can be used as soon as you
return to the radio network, you should immediately regis-
ter it again:
Press the On/Off key until the display is blank, press
the On/Off key again until the mobile unit is on.
● If you intend to leave the radio network and take your
mobile unit with you, we recommend that you turn the
mobile unit off in order to save the batteries.
An attachment clip is supplied with your mobile unit and can
be attached to facilitate portability.
To use this clip, remove the plug on the rear of the mobile
unit by inserting a coin and turning it clockwise through 90°.
Insert the pivot supplied into the opening left by the plug and
screw it clockwise through 90° until it locks into place.
The mobile unit can now be attached via this pivot to the belt
clip.
To clean the mobile unit and the charging shell, simply wipe
them with a damp or antistatic cloth. Never use a dry cloth
(since this can generate electrostatic charges and dis-
charges) and never use abrasive cleaning agents.
● If you lend your mobile unit to someone else, please make
sure that you include the operating instructions with it.
● Please dispose of defective batteries, mobile units and
charging shells in accordance with legal requirements.
Leaving the radio network
Fitting the attachment clip
Cleaning the mobile unit
Lending/disposing
General