Siemens Hicom cordless EM - Manual (Page 19)

19
Putting the mobile unit into service
.
For information on setting the language, see page 57.
Your system administrator supplies you with mobile units
that have already been logged on when you are installing
the system for the first time. You must log on any new mobile
units as described below if you extend the system.
● Please call Siemens Service if you purchased the mobile
unit directly from Siemens. Please call your retailer if
you did not purchase your mobile unit directly from Sie-
mens. Please ask Siemens Service or your retailer to pro-
vide you with the call number and the system code (eight-
digit) of every mobile unit and to open the "logon window"
(e.g. 10 minutes).
● Logging a mobile unit onto Hicom 150 E:
H
Switch the mobile unit on with the On/
Off key -
>!#-!,
appears in the
display with the first logon procedure.
-!
* , for example, flashes with the
second logon procedure.
Press the menu key – the main menu
is displayed.
Scroll with the left display key until
?!)#-
is selected (in the top dis-
play line) and confirm the selection
with the right display key.
Scroll with the left display key until
>!#-!,
is selected and confirm.
Confirm
-!
*, for example, to log
on as system 1.
If necessary, select another base/
system with the display key.
)!,-!* !
is displayed.
Logging mobile units onto a telephone system
* See note "Base/system" on page 20
;
?!)#-
9
<
>!#-!,
9
-!
9
<
)!,-!
* !