Sherwood R-772 - Manual (Page 62)

ENGLISH
62
When selecting the ROOM EQ SETUP
• The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your
room measured by the auto setup, the room EQ automatically adjusts the frequency response of your
speakers.
• If you use different brands or sizes of speakers for some channels or have a room with unique acoustic
characteristics, such as walls, furniture, and the dimensions or the shape of the room, we recommend using
the room EQ.
■ Note :
• To use the room EQ, first you should finish measuring the acoustic characteristics of your room performing
the auto setup.
(For details, refer to "When selecting the AUTO SETUP" on page 57.)
OFF : When turning off the room EQ.
FLAT : To adjust the frequency response of all speakers to
the flattest response. This mode is suitable for multi
channel music surround sound sources.
FRONT : To adjust the frequency response of the surround
and the surround back speakers to match the
characteristics of the front speakers.
USER : To adjust the tonal quality of the different speakers
(except the subwoofer) manually.
■ Note :
• Only when the auto setup has been performed, the FLAT
and the FRONT modes can be selected.
1.
Press the CURSOR UP( ▲ )/DOWN( ▼ ) buttons to select the ROOM EQ SETUP, then press the ENTER
button.
2.
Press the CURSOR UP( ▲ )/DOWN( ▼ ) buttons to select the MODE.
3.
Press the CURSOR LEFT( ◀ )/RIGHT( ▶ ) buttons to select the desired room EQ mode.
Parameter
mode
R-772(A) 2007.8.16 5:21 PM 페이지 62