Sherwood R-772 User Manual
Page 39
ENGLISH
39
• The station has now been stored in the memory.
• A stored frequency is erased from the memory
by storing another frequency in its place.
• If "MEM" goes off, start again from the above
step 2.
�
MEMORY BACKUP FUNCTION
The following items, set before the receiver is
turned off, are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Scanning preset stations in sequence
• The receiver will start scanning the stations in the
preset sequence and each station is received for 5
seconds.
• At the desired station, press this button again to
stop scanning.
Tuning to preset stations
Manual presetting
• You can store up to 30 preferred stations in the
memory.
• "MEM" is flickering for several seconds.
• After selecting the tuner as an input source, select
the desired preset number.
1.
Tune in the desired station with auto or manual
tuning.
3.
Select the desired preset number (1~30) and
press the MEMORY/ENTER button.
4.
Repeat the above steps 1 to 3 to memorize
other stations.
2.
Press the MEMORY/ENTER button.
R-772(A) 2007.8.16 5:21 PM 페이지 39