Sherwood R-772 User Manual
Page 56
ENGLISH
56
When selecting the NAME
• You can give names to the input sources other than
tuner.
• Up to 7 characters can be entered for each name.
Example: When selecting the VIDEO 1
• The name is stored in the memory.
■
To resume its factory input source name.
• Make a blank on each digit and press the ENTER
button.
• The first digit flickers.
• Then the selected digit will flicker.
• You can enter the desired among blank, A ~ Z,
a ~ z, 0 ~ 9, (, ),
�
, +, , , -, ., /.
1.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons
to select the desired input source, then press
the ENTER button.
3.
Press the CURSOR LEFT(
◀
)/ RIGHT(
▶
)
buttons to select the desired digit.
4.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons
to enter the desired character on the flickering
digit.
5.
Repeat the above steps 3 and 4 to enter the
desired characters on the rest of the digits.
6.
Confirm your entry.
2.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons
to select the NAME, then press the ENTER
button.
R-772(A) 2007.8.16 5:21 PM 페이지 56