Sherwood R-772 User Manual
Page 51
ENGLISH
51
③
. Press the CURSOR LEFT(
◀
)/RIGHT(
▶
) buttons to adjust the selected tone as desired.
• The tone level can be adjusted within the range of -10 ~
+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps
②
and
③
.
OFF : To turn off the cinema EQ function.
�
ON : To compensate for edgy or shrill movie sound tracks.
When selecting the CINEMA EQ
BLACK : To display the black as the color background of the momentary OSD and the OSD menu.
�
BLUE : To display the blue.
■
Note : Only when no video signals are input into this unit, the selected background color will be displayed.
When selecting the BACKGROUND
ON : To turn on the OSD function that shows the status corresponding to each operation on this unit
�
momentarily.
OFF : To turn it off.
When selecting the MOMENTARY OSD
■
Note : When outputting the component video signal from the COMPONENT MONITOR OUT jacks as it was
input, the momentary OSD cannot be displayed.
Continued
②
. Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons to select the desired tone mode.
R-772(A) 2007.8.16 5:21 PM 페이지 51