Siemens 4010 - Manual (Page 80)

76
Press keys:
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619 anlagen.fm 11.6.01
Connecting the base station to
a PABX
Dialling mode and flash time
Step 1: Changing the dialling mode
You only need to change the dialling mode if your PABX
does not operate with preset tone dialling (DTMF dual-
t
one multifrequency). Please refer to the operating
instructions for your PABX .
Options:
– Tone dialling (DTMF)
– Dial pulsing (DP)
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Base Settings Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Add. Features Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Dialling Mode Select the menu item and confirm.
Select dialling mode you want and confirm.
Step 2: Setting the flash time
Prerequisite: your PABX requires a flash time other
than the preset flash time (to set up a connection to the
telephone network.
Please refer to the operating instructions for your
PABX
.
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Base Settings Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Add. Features Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
TBR Select the menu item and confirm.
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.
Œ
The appropriate settin g is marked with a
'
.