Activating/deactivating auto talk, Resetting the handset to the factory setting – Siemens 4010 User Manual
Page 75
71
Press keys:
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619
mobilt.fm
11.6.01
Activating/deactivating Auto Talk
When this function is activated you can remove the
handset from the charging unit/base station without
pressing the handset key
!
to accept a call
(factory
setting).
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
H/Set Settings
Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Auto Answer
Select the function and press
to activate/deactiva-
te it (
'
= function on).
Resetting the handset to the factory
setting
The directory, the network access list and the caller list
are not deleted when you reset the handset. Registra-
tion at the base station is not affected.
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
H/Set Settings
Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Reset Handset
Select the menu item and confirm.
<(6
Confirm check prompt.
'
Function
Factory setting
Handset volume (see page 68) 1
Ringer volume (see page 69)
5
Ringer melodie (see page 69)
1
Auto talk (see page 71)
on
Battery low beep (see
page 70)
on
Room monitor level(see
page 68)
5
Room monitor level (see
page 63)
high
Time control (see page 69)
off
Display language (see
page 68)
local
Redialling list
(see page 20)
deleted