Troubleshooting, Sms with isdn pabxs, Sms with did-capable pabxs – Siemens 4010 User Manual
Page 56
52
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619
sms.fm
11.6.01
Troubleshooting
SMS with ISDN PABXs
Example:
Your Gigaset is connected to an ISDN PABX. SMS messages can be
sent
from all Comfort handsets.
SMS with DID-capable PABXs
SMS receipt:
If your Gigaset is connected to a PABX that supports direct inward di-
alling, it can only receive SMS messages if the CLIP number was for-
warded to the PABX extension. The CLIP evaluation of the SMS cen-
tre’s telephone number is performed in the Gigaset.
SMS transmission:
When sending SMS messages, the sender’s telephone number is
sometimes sent without the extension number. It is thus not possible
for your partner to answer.
Error
message
Possible causes
Solution
1
Sending not
possible
“Telephone number trans-
mission” feature not set
Ask your telecommunica-
tion service provider (Tele-
kom) to activate this fea-
ture
3
Number of SMS centre
not stored in the tele-
phone
Enter the number
4
SMS transmission was in-
terrupted
Wait until the SMS is trans-
mitted before using addi-
tional functions (e.g. tele-
phone call). Note display.