SMC Networks SpacePC 1232 Series - Manual (Page 40)

40
How to use the Setup program
To enter in the Setup Program, reboot or switch-on your module and then press the “F2” key.
After waiting a few seconds the main menu will appear.
The Main menu of the setup program shows a list of options that are available.
A highlight shows which option is currently selected.
Use the cursor arrow keys to move the highlight to other options.
When an option (i.e.: General) is highlighted, it is possible to execute it by pressing the “Enter”
key.
A table of items will be displayed on the right side of the screen.
Now it is possible to select among several items (i.e.: Time, Date, Floppy Disk 1,… ) using the
arrow keys and the “Enter” key.
When an item is highlighted, it is possible to change its value by pressing the “PageUp” and
“PageDown” keys.
Time
and Date items are set using the keys “PageUp” and “PageDown” and the keys from “0” to
“9”; press “Enter” to confirm. To correct errors press the “BackSpace” key.